KRYPTONITE UPPER AND LOWER BALL JOINT PACKAGE DEAL FOR AFTERMARKET CONTROL ARMS 2011–2026 CHEVY/GMC HD TRUCKS
KRYPTONITE UPPER AND LOWER BALL JOINT PACKAGE DEAL FOR AFTERMARKET CONTROL ARMS 2011–2026 CHEVY/GMC HD TRUCKS
Fits:
2011–2026 Chevy 2500HD / 3500
2011–2026 GMC 2500HD / 3500
Important Fitment Details:
Works with Aftermarket Bolt-On Ball Joint Style Upper Control Arms ONLY
Lower ball joints are designed to replaced OEM on OE style lower control arms
Includes:
- 2 x Kryptonite Lower Ball Joints (Part# KR0232)
- 2 x Kryptonite Bolt-In Upper Ball Joints (Part# KR6292)
Features:
- Designed to replace factory ball joints prone to premature wear on lifted vehicles with large off-road tires
- Fully greaseable metal-on-metal design
- Machined bearing housing made from sintered graphite, bronze, and 1045 steel
- Ball joint stud made from 4140 steel with induction heat-treated bearing surface
- Ball joint boot constructed from tear/wear-resistant silicone polyurethane
- Outperforms factory ball joints and includes all necessary hardware for installation
Description:
These ball joints represent the latest evolution of Kryptonite’s ball joint design. Improving not only on factory components, but even on previous Kryptonite generations. Every aspect of this joint was engineered to survive the demands of lifted trucks, oversized tires, aggressive alignment settings, and real-world abuse.
A massive chromoly stud, powdered-metal races, and a metal-on-metal internal design work together to deliver unmatched strength and articulation. The coil-spring compression system maintains consistent preload throughout suspension travel, reducing looseness and extending service life even under extreme conditions.
Finished with a corrosion-resistant gold zinc cap and protected by a thick rubber boot, they are built for longevity, performance, and reliability. Whether you’re daily driving, towing, or pushing your truck off-road, this is a true heavy-duty upgrade over stock and aftermarket alternatives.
Upon install, these ball joints will require 4-6 pumps of grease. Going forward, the recommended service interval is about a half pump every 5,000–7,000 miles. Think of grease like blood in your body: without it, nothing survives. The boots are to keep dust and debris out and not to hold grease in so be careful not to over-grease.
Warranty:
(Kryptonite No Fine Print Lifetime Warranty)
Kryptonite Steering & Suspension components are warrantied for life to their original purchaser. This warranty covers manufacturer defects, premature wear, or breakage. Race it, jump it, off‑road it, wreck it, lift it—we don’t care. If you can break it, we’ll replace it.
Your Kryptonite products must be purchased through an Authorized Dealer, and Warranty Registration completed within 90 days of purchase. Complete warranty details can be found [here].
Original: $199.99
-65%$199.99
$70.00More Images
KRYPTONITE UPPER AND LOWER BALL JOINT PACKAGE DEAL FOR AFTERMARKET CONTROL ARMS 2011–2026 CHEVY/GMC HD TRUCKS
Fits:
2011–2026 Chevy 2500HD / 3500
2011–2026 GMC 2500HD / 3500
Important Fitment Details:
Works with Aftermarket Bolt-On Ball Joint Style Upper Control Arms ONLY
Lower ball joints are designed to replaced OEM on OE style lower control arms
Includes:
- 2 x Kryptonite Lower Ball Joints (Part# KR0232)
- 2 x Kryptonite Bolt-In Upper Ball Joints (Part# KR6292)
Features:
- Designed to replace factory ball joints prone to premature wear on lifted vehicles with large off-road tires
- Fully greaseable metal-on-metal design
- Machined bearing housing made from sintered graphite, bronze, and 1045 steel
- Ball joint stud made from 4140 steel with induction heat-treated bearing surface
- Ball joint boot constructed from tear/wear-resistant silicone polyurethane
- Outperforms factory ball joints and includes all necessary hardware for installation
Description:
These ball joints represent the latest evolution of Kryptonite’s ball joint design. Improving not only on factory components, but even on previous Kryptonite generations. Every aspect of this joint was engineered to survive the demands of lifted trucks, oversized tires, aggressive alignment settings, and real-world abuse.
A massive chromoly stud, powdered-metal races, and a metal-on-metal internal design work together to deliver unmatched strength and articulation. The coil-spring compression system maintains consistent preload throughout suspension travel, reducing looseness and extending service life even under extreme conditions.
Finished with a corrosion-resistant gold zinc cap and protected by a thick rubber boot, they are built for longevity, performance, and reliability. Whether you’re daily driving, towing, or pushing your truck off-road, this is a true heavy-duty upgrade over stock and aftermarket alternatives.
Upon install, these ball joints will require 4-6 pumps of grease. Going forward, the recommended service interval is about a half pump every 5,000–7,000 miles. Think of grease like blood in your body: without it, nothing survives. The boots are to keep dust and debris out and not to hold grease in so be careful not to over-grease.
Warranty:
(Kryptonite No Fine Print Lifetime Warranty)
Kryptonite Steering & Suspension components are warrantied for life to their original purchaser. This warranty covers manufacturer defects, premature wear, or breakage. Race it, jump it, off‑road it, wreck it, lift it—we don’t care. If you can break it, we’ll replace it.
Your Kryptonite products must be purchased through an Authorized Dealer, and Warranty Registration completed within 90 days of purchase. Complete warranty details can be found [here].
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Fits:
2011–2026 Chevy 2500HD / 3500
2011–2026 GMC 2500HD / 3500
Important Fitment Details:
Works with Aftermarket Bolt-On Ball Joint Style Upper Control Arms ONLY
Lower ball joints are designed to replaced OEM on OE style lower control arms
Includes:
- 2 x Kryptonite Lower Ball Joints (Part# KR0232)
- 2 x Kryptonite Bolt-In Upper Ball Joints (Part# KR6292)
Features:
- Designed to replace factory ball joints prone to premature wear on lifted vehicles with large off-road tires
- Fully greaseable metal-on-metal design
- Machined bearing housing made from sintered graphite, bronze, and 1045 steel
- Ball joint stud made from 4140 steel with induction heat-treated bearing surface
- Ball joint boot constructed from tear/wear-resistant silicone polyurethane
- Outperforms factory ball joints and includes all necessary hardware for installation
Description:
These ball joints represent the latest evolution of Kryptonite’s ball joint design. Improving not only on factory components, but even on previous Kryptonite generations. Every aspect of this joint was engineered to survive the demands of lifted trucks, oversized tires, aggressive alignment settings, and real-world abuse.
A massive chromoly stud, powdered-metal races, and a metal-on-metal internal design work together to deliver unmatched strength and articulation. The coil-spring compression system maintains consistent preload throughout suspension travel, reducing looseness and extending service life even under extreme conditions.
Finished with a corrosion-resistant gold zinc cap and protected by a thick rubber boot, they are built for longevity, performance, and reliability. Whether you’re daily driving, towing, or pushing your truck off-road, this is a true heavy-duty upgrade over stock and aftermarket alternatives.
Upon install, these ball joints will require 4-6 pumps of grease. Going forward, the recommended service interval is about a half pump every 5,000–7,000 miles. Think of grease like blood in your body: without it, nothing survives. The boots are to keep dust and debris out and not to hold grease in so be careful not to over-grease.
Warranty:
(Kryptonite No Fine Print Lifetime Warranty)
Kryptonite Steering & Suspension components are warrantied for life to their original purchaser. This warranty covers manufacturer defects, premature wear, or breakage. Race it, jump it, off‑road it, wreck it, lift it—we don’t care. If you can break it, we’ll replace it.
Your Kryptonite products must be purchased through an Authorized Dealer, and Warranty Registration completed within 90 days of purchase. Complete warranty details can be found [here].
